Appendix B
Windows Vista Configuration
26
Dual-Band Wireless-N USB Network Adapter
Enter the security key, WEP key, or passphrase (also
known as a pre-shared key), depending on your type
of security. Click Connect.
Secured Network
This screen appears while the Adapter connects to
your network. Do not cancel, unless you want to end
the installation.
Connecting to Network
5.
6.
This screen appears when you are connected to your
network. Select Save this network, if you want to save
your settings. Click Close.
Connected to Network
The Set Network Location screen may appear to help
apply the correct settings for your type of location.
Select Home, Work, or Public location.
Select Network Location
7.
8.
To Next Page
Loading...
Need help?
General
