Cisco Linksys WUSB600N - Appendix B: Windows Vista Configuration; Initial Setup in Windows Vista; Establishing a New Wireless Connection

Appendix B
Windows Vista Configuration
25
Dual-Band Wireless-N USB Network Adapter
Appendix B:
Windows Vista
Configuration
Windows Vista Configuration
After you have installed the Adapter, the Windows Vista
Wireless Network Configuration utility icon appears on
your computer’s system tray.
Wireless Network Configuration Utility Icon
When your mouse pointer hovers over the icon, the status
information of your wireless connection appears.
Wireless Connection Status
New Wireless Connection
To connect to a different wireless network:
Right-click the Wireless Network Configuration
utility icon.
Click Connect to a network.
Utility Menu
1.
2.
Select your network, and then click Connect.
Select Network
If your network has wireless security, go to step 5.
If your network has no wireless security, this screen
appears. To connect to your unsecured network, click
Connect Anyway and go to step 7.
Unsecured Network
3.
4.