Cisco MGBBX1 - Page 8

8 Cisco Mini-GBIC SFP Transceiver Quick Start Guide
* Requires manual configuration for the 100M SFP. See the following
section.
Manually Configuring the 100M SFP
STEP 1 On the Port Configuration page, click Detail.
STEP 2 In the Port Configuration popup window, select eth 100M in the
SFP Speed field.
STEP 3 Save your changes.
STEP 4 Insert the 100M SFP module.
SGE2000 3.0.0.17 SF200-48P All versions
SGE2000P 3.0.0.17 SG200-18 All versions
SFE2010 2.0.1.75 SG200-26 All versions
SGE2010 1.0.2 SG200-26P All versions
SLM224G2-CN 1.0.1 SG200-50 All versions
SLM224G 1.0.1 SG200-50P All versions
SLM248G 1.0.1 SF200E-24 All versions
SLM224P 1.0.1 SF200E-24P All versions
SLM248P 1.0.1 SF200E-48 All versions
SLM2024 1.0.1 SF200E-48P All versions
SLM2048 1.0.1
SLM224G4S 1.0.1
SLM248G4S 1.0.4
Model Number MFEBX1/
MFEFX1/
MFELX1
Model Number MFEBX1/
MFEFX1/
MFELX1