Cisco MX300 G2 Installing

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
2
Mounting the monitor
Use gloves when
handling the monitor.
Remove the cable
channel lid for now.
You need it in step 4.
The monitor may be tilting slightly
forward. If you gently pull it to a vertical
position, the screws enter more easily.
Front
4 × M6x16
B C

Cisco MX300 G2 Specifications

General

Microphone	Integrated microphone array
Connectivity	Ethernet, HDMI, USB
Frame Rate	60 fps
Protocols	SIP, H.323
Video Conferencing Support	Yes
Operating System	Cisco Collaboration Endpoint Software
Camera	PrecisionHD Camera 1080p
Display	27-inch LCD
Control	Touchscreen controller
Product Type	Video conferencing system
Video Standards	H.264, H.265
Power	100-240 VAC, 50/60 Hz, 12.5 A