15
Step 3 Configure External Identity for the DMZ Web Server
The DMZ server is easily accessible by all hosts on the Internet. This configuration requires translating
the DMZ server IP address so that it appears to be located on the Internet, enabling outside HTTP
clients to access it unaware of the firewall. Complete the following steps to map the DMZ IP address
(30.30.30.30) statically to a public IP address (209.165.156.11):
a. Right click in the gray area under the Translation Rules tab.
b. Select Add.
c. Select dmz from the drop-down menu of interfaces.
d. Enter the server IP address (30.30.30.30) or select the server by clicking on the Browse button.
e. Select 255.255.255.255 from the Mask drop-down menu.
f. Click the Static radio button.
g. Enter the external IP address (209.165.156.11). The Advanced button allows you to configure
features such as limiting the number of connections per static entry and DNS rewrites.
h. Click the OK
button.
i. Confirm the values that you entered. Click the Apply button.
To Next Page
Loading...
Need help?
General
