Cisco PWR-C1-1900WAC-P User Manual

Figure 10: Attaching the Ground Lug and Wire Assembly
Attaching the dual-hole
ground lug
2Attaching the single-hole
ground lug
1
Step 6 Using a ratcheting torque screwdriver, torque the ground-lug screws to 60 lbf-in. (960 ozf-in.).
Step 7 Connect the other end of the grounding wire to an appropriate grounding point at your site or to the rack.
Installing the DC Power Supply in the Switch
Before you begin
Before installing the power supply, see the Installation Guidelines, on page 5.
Installing a Power Supply
11
Installing a Power Supply
Installing the DC Power Supply in the Switch

Cisco PWR-C1-1900WAC-P Specifications

General

Brand	Cisco
Model	PWR-C1-1900WAC-P
Category	Power Supply
Language	English