Connecting Digital Modem Network Modules to a Network 10-7
Adding 6-Port MICA Modules to a Digital Modem Network Module
Figure 10-3 6-Port MICA Module
To remove, replace, or install a MICA module, you must first remove the digital modem
module from the router chassis.
Caution To avoid damaging electrostatic discharge (ESD)-sensitive components,
observe all ESD precautions when handling MICA modules. To avoid damaging the
network module or the MICA module, avoid excessive force when you remove or replace
MICA modules.
H10826
Alignment holes
Connector edge
Polarization notchPolarization notch
To Next Page
Loading...
