Cisco RV110W Wireless-N VPN Firewall 5
STEP 3 Connect one end of a different Ethernet cable to one of the LAN
(Ethernet) ports on the back of the unit. (In this example, the LAN 1
port is used.) Connect the other end to an Ethernet port on the PC
that you will use to run the web-based Setup Wizard and Device
Manager.
STEP 4 Power on the cable or DSL modem and wait until the connection is
active.
STEP 5 Connect the power adapter to the Cisco RV110W POWER port.
To Next Page
Loading...
