Cisco SG 300-10 - Page 175

Configuring Multicast Forwarding
Defining Unregistered Multicast Settings
Cisco Small Business 300 Series Managed Switch Administration Guide 164
14
switch to forward the Multicast frames (from a registered Multicast group) only to
ports that are joined to that Multicast group. The switch forwards Multicast frames
(from a registered Multicast group) only to ports that are registered to that
Multicast group.
The Unregistered Multicast Page enables handling Multicast frames that belong
to groups that are not known to the switch (unregistered Multicast groups).
Unregistered Multicast frames are usually forwarded to all ports on the VLAN.
You can select a port to receive or filter unregistered multicast streams. The
configuration is valid for any VLAN of which it is a member (or will be a member).
This feature ensures that the customer receives only the Multicast groups
requested and not others that may be transmitted in the network.
To define unregistered Multicast settings:
STEP 1 Click Multicast > Unregistered Multicast. The Unregistered Multicast Page
opens.
STEP 2 Define the following:
• Interface Type equals to—The view as all ports or all LAGs.
• Entry No.—The entry number in the Unregistered Multicast Table.
• Interface—Displays the interface ID.
• Unregistered Multicast—Displays the forwarding status of the selected
interface. The possible values are:
- Forwarding—Enables forwarding of unregistered Multicast frames to the
selected interface.
- Filtering—Enables filtering (rejecting) of unregistered Multicast frames to
the selected interface.
STEP 3 Click Edit. The Edit Unregistered Multicast Page opens.
STEP 4 Define the Unregistered Multicast field.
• Interface—Select the interface to be modified.
• Unregistered Multicast—Define the forwarding status of the interface. The
options are as follows:
- Forwarding—Enables forwarding of unregistered Multicast frames to the
selected interface.