Need help?Do you have a question about the Cisco SG 200-08 and is the answer not in the manual?
General| Model | SG 200-08 |
|---|---|
| Ports | 8 x 10/100/1000 |
| Switching Capacity | 16 Gbps |
| Forwarding Rate | 11.9 Mpps |
| Layer | Layer 2 |
| Management | Web-based |
| VLAN Support | Yes |
| QoS | Yes |
| Jumbo Frame Support | Yes |
| Operating Humidity | 10% to 90% non-condensing |
| MAC Address Table Size | 8K entries |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4 to 158°F (-20 to 70°C) |
| Storage Humidity | 10% to 95% non-condensing |
Lists the items included with the Cisco Small Business Smart Switch.
Provides instructions and diagrams for mounting the switch on a wall.
Explains power requirements and port types for PoE-enabled switch models.
States prerequisites for configuring the switch, such as browser compatibility.
Describes how to access the switch's management interface via a web browser.
Outlines post-configuration tasks for network setup and saving settings.
Details common connection issues and their solutions, including IP address conflicts.
Identifies and describes the RJ-45 Ethernet ports on the rear of the switch.
Explains the status indicators (LEDs) on the front of the switch and their meanings.
Locates and describes the power port on the side of the switch.
Instructs users on how to reset the switch to its original factory configuration.
Provides contact information and links for Cisco Small Business support resources.
Lists resources for obtaining additional documentation like administration guides.
Offers links to Cisco Small Business partner programs and the main SMB portal.
To Next Page
