VLAN Management
Voice VL AN
189 Cisco Small Business 200 Series Smart Switch Administration Guide
12
• Switch MAC Address—Base MAC address of the device. If the device's
Switch MAC address is the Root Switch MAC Address, the device is the
Auto Voice VLAN root device.
• Voice VLAN ID Change Time—Last time that voice VLAN was updated.
STEP 2 Click Restart Auto Voice VLAN to reset the voice VLAN to the default voice VLAN
and restart Auto Voice VLAN discovery on all the Auto-Voice-VLAN-enabled
switches in the LAN.
The Voice VLAN Local Table displays voice VLAN configured on the device, as
well as any voice VLAN configuration advertised by directly-connected neighbor
devices. It contains the following fields:
• Interface—Displays the interface on which voice VLAN configuration was
received or configured. If N/A appears, the configuration was done on the
device itself. If an interface appears, a voice configuration was received from
a neighbor.
• Source MAC Address— MAC address of a UC from which the voice
configuration was received.
• Source Type— Type of UC from which voice configuration was received.
The following options are available:
- Default—Default voice VLAN configuration on the device
- Static—User-defined voice VLAN configuration defined on the device.
- CDP—UC that advertised voice VLAN configuration is running CDP.
- LLDP—UC that advertised voice VLAN configuration is running LLDP.
- Voice VLAN ID—The identifier of the advertised or configured voice
VLAN
• Voice VLAN ID—The identifier of the current voice VLAN.
• CoS/802.1p—The advertised or configured CoS/802.1p values that are
used by the LLDP-MED as a voice network policy.
• DSCP—The advertised or configured DSCP values that are used by the
LLDP-MED as a voice network policy.
• Best Local Source—Displays whether this voice VLAN was used by the
device. The following options are available:
To Next Page
Loading...
