Cisco SPA500S Specifications

Data Sheet
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 3
Features
●
32 programmable multicolored LED buttons
●
Illuminated line status monitoring (green for idle, red for in use, blinking red for ringing, orange for registration
error)
●
Call transfer
●
Speed dial
●
DSS
●
Busy lamp field
●
One-touch transfer
●
Call pickup
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco SPA500S
Expansion Module.
Table 1. Specifications for the Cisco SPA500S Expansion Module
Specifications
Ports 2 auxiliary ports
Buttons 32
LEDs Multicolored: green, red, orange
Documentation
●
Quick Installation Guide
●
User Guide
●
Administration Guide
●
Provisioning Guide (for service providers only)
Environmental
Dimensions
W x H x D
4 x 8.5 x 1.5 in.
(101 x 201 x 39 mm)
Unit weight 2 lb (0.9 kg)
Power Provided by host Cisco SPA 500 Series IP phone
Certification FCC, cUL, CE, Canadian Interference-Causing Equipment Standard ICES-003
Operating temperature 41º to 113ºF (0º to 40ºC)
Storage temperature –13º to 185ºF (–40º to 70ºC)
Operating humidity 5% to 95% noncondensing, operating and nonoperating
Storage humidity 5% to 95% noncondensing, operating and nonoperating
Package Contents
●
Cisco SPA500S Expansion Module
●
Attachment arm
●
Two attachment arm screws
●
Auxiliary cable
●
Desktop stand
●
Quick Installation Guide
Minimum Requirements
●
Cisco SPA500 Series IP Phone

Cisco SPA500S Specifications

General

Brand	Cisco
Model	SPA500S
Category	Telephone Accessories
Language	English