Cisco SPA500S User Manual

Quick Start Guide
Cisco Small Business Pro
SPA500S 32-Button Attendant Console for Cisco
Small Business Pro SPA500 Series IP Phones
Package Contents
• SPA500S 32-Button Attendant Console
• Quick Start Guide
• Attachment Arm
• Attachment Arm Screws (2)
• Auxiliary Interconnect Cable
• Stand
Connecting to the SPA500
Series IP Phone
The following procedure describes how to attach the SPA500S to a SPA500
Series IP Phone.
STEP 1 Turn both the SPA500 Series IP Phone and the SPA500S face down.
STEP 2 Align the screw hole in the SPA500 Series IP Phone with one of the
holes on the attachment arm.
STEP 3 Insert the pegs on the attachment arm into the peg holes on the
SPA500 Series IP Phone.
1
STEP 4 Using an attachment arm screw, secure the attachment arm to the
SPA500 Series IP Phone.
STEP 5 Align the right screw hole in the SPA500S with the unused hole on the
attachment arm.
STEP 6 Insert the pegs on the attachment arm into the peg holes on the
SPA500S.
STEP 7 Using an attachment arm screw, secure the attachment arm to the
SPA500S.
CAUTION Do not plug a telephone line cord into the AUX port. Use
only the auxiliary cable provided with the SPA500S.
STEP 8 Locate the AUX IN port on the back of the SPA500S. Connect one end
of the auxiliary cable to this port.
STEP 9 Locate the AUX port on the back of the SPA500 Series IP Phone.
Connect the other end of the auxiliary cable to this port. The SPA500S
is powered by the auxiliary cable with the SPA500 Series IP Phone; no
additional power source is required.
STEP 10 Route the auxiliary cable inside the cable slot of the SPA500S.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Cisco SPA500S Specifications

General

Number of Buttons	32
Connectivity	Wired
Connectivity Technology	Ethernet
Supported Protocols	SIP
Weight	1.5 lbs
Product Type	Expansion module
Compatibility	Cisco SPA500 Series
Display	LCD
Dimensions (H x W x D)	199.9 x 124.9 x 44.9 mm (7.87 x 4.92 x 1.77 in)
Indicators	LED indicators for line status

Summary

Connecting the SPA500 Series IP Phone

Attaching and Connecting the SPA500S Console

Attaches the SPA500S attendant console to the SPA500 Series IP Phone using an attachment arm and auxiliary cable.

Connecting a Second SPA500S

Connecting a Second SPA500S Console

Connects a second SPA500S attendant console to the IP phone and the first SPA500S.

Configuring the SPA500S

SPA500S Configuration Methods

Details configuration methods including Setup Wizard, web UI, and server-specific options.

Using the SPA500S

Monitoring Line Status with LEDs

Explains LED colors for line status: idle, in use, ringing, unregistered, or not configured.

Where to Go from Here

Additional Resources and Support

Provides links to technical documentation, customer support, open source notices, compliance, and warranty information.