Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 14 of 69
m. Direct your browser to the SPA8800's web user interface (web-ui)
http://<IP_address_of_SPA8800>/admin/advanced
n. Change the following parameters:
Network tab > Wan Status tab:
i. Internet Connection Settings > Connection Type: Static IP
ii. Static IP Settings:
1. Static IP:
2. Netmask:
3. Gateway:
iii. Optional Settings:
1. Primary DNS
2. Secondary DNS
3. Primary NTP Server
o. Click Submit All Changes
To Next Page
Loading...
Need help?
General