Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 15 of 69
Upgrading the SPA8800's Firmware
1. Direct your browser to the SPA8800's web user interface (web-ui)
http://<IP_address_of_SPA8800>/admin/advanced
2. Verify that Compare Network tab > Status tab > Product Information > Software Version:
is up to date with SPA8800 firmware available at the Cisco.com site. If newer firmware is
available, save it to disk and upgrade the SPA8800 as follows:
3. Copy the downloaded firmware image to your TFTP server's root directory
4. Cause the SPA8800 to retrieve the firmware by TFTP and install the new image:
http://IPADDRESSofSPA/upgrade?tftp://TFTPADDRESS/SPAFILE.bin
Where:
• IPADDRESSofSPA is the SPA8800 IP address
• TFTPADDRESS is the TFTP server's IP address
• SPAFILE.bin is the name of the downloaded firmware image
Example:
http://192.168.2.237/upgrade?tftp://192.168.2.20/spa8800-6-1-7-GW.bin
To Next Page
Loading...
