EasyManuals Logo

Cisco SPA8800 Configuring

Cisco SPA8800
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 34 of 69
Frame 15 (548 bytes on wire, 548 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: CiscoLin_db:51:d2
(00:0e:08:db:51:d2)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.13 (192.168.2.13)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 401 Unauthorized
Status-Code: 401
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.13:5060;branch=z9hG4bK-d83df1c;received=192.168.2.13
Transport: UDP
Sent-by Address: 192.168.2.13
Sent-by port: 5060
Branch: z9hG4bK-d83df1c
Received: 192.168.2.13
From: "Asterisk201" <sip:201@192.168.2.20>;tag=2b2b435b2119d3aco0
SIP Display info: "Asterisk201"
SIP from address: sip:201@192.168.2.20
SIP tag: 2b2b435b2119d3aco0
To: "Asterisk201" <sip:201@192.168.2.20>;tag=as6eb2d1ad
SIP Display info: "Asterisk201"
SIP to address: sip:201@192.168.2.20
SIP tag: as6eb2d1ad
Call-ID: a20ca248-9753b6bc@192.168.2.13
CSeq: 52217 REGISTER
Sequence Number: 52217
Method: REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="4bb63f6e"
Authentication Scheme: Digest
Algorithm: MD5
Realm: "asterisk"
Nonce Value: "4bb63f6e"
Content-Length: 0
Frame 16 (684 bytes on wire, 684 bytes captured)
Ethernet II, Src: CiscoLin_db:51:d2 (00:0e:08:db:51:d2), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.13 (192.168.2.13), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: REGISTER sip:192.168.2.20 SIP/2.0
Method: REGISTER
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.13:5060;branch=z9hG4bK-8674aa69
Transport: UDP
Sent-by Address: 192.168.2.13
Sent-by port: 5060
Branch: z9hG4bK-8674aa69
From: "Asterisk201" <sip:201@192.168.2.20>;tag=2b2b435b2119d3aco0
SIP Display info: "Asterisk201"
SIP from address: sip:201@192.168.2.20
SIP tag: 2b2b435b2119d3aco0
To: "Asterisk201" <sip:201@192.168.2.20>
SIP Display info: "Asterisk201"
SIP to address: sip:201@192.168.2.20
Call-ID: a20ca248-9753b6bc@192.168.2.13
CSeq: 52218 REGISTER
Sequence Number: 52218
Method: REGISTER
Max-Forwards: 70
Authorization: Digest
username="201",realm="asterisk",nonce="4bb63f6e",uri="sip:192.168.2.20",algorithm=MD5,response
="9ee3ff52ed50c8276650bd33d8aa347b"
Authentication Scheme: Digest
Username: "201"
Realm: "asterisk"
Nonce Value: "4bb63f6e"
Authentication URI: "sip:192.168.2.20"
Algorithm: MD5
Digest Authentication Response: "9ee3ff52ed50c8276650bd33d8aa347b"
Contact: "Asterisk201" <sip:201@192.168.2.13:5060>;expires=0
Contact Binding: "Asterisk201" <sip:201@192.168.2.13:5060>;expires=0
URI: "Asterisk201" <sip:201@192.168.2.13:5060>
SIP Display info: "Asterisk201"
SIP contact address: sip:201@192.168.2.13:5060
User-Agent: Linksys/SPA922-6.1.3(a)
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces

Other manuals for Cisco SPA8800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA8800 and is the answer not in the manual?

Cisco SPA8800 Specifications

General IconGeneral
BrandCisco
ModelSPA8800
CategoryGateway
LanguageEnglish

Related product manuals