EasyManuals Logo

Cisco SPA8800 Configuring

Cisco SPA8800
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 43 of 69
Request-Line: ACK sip:102@192.168.2.20 SIP/2.0
Method: ACK
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5060;branch=z9hG4bK-d558dcd5
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5060
Branch: z9hG4bK-d558dcd5
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=377ea678f1613b1o0
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: 377ea678f1613b1o0
To: <sip:102@192.168.2.20>;tag=as4380da58
SIP to address: sip:102@192.168.2.20
SIP tag: as4380da58
Call-ID: c677a744-912e2955@192.168.2.237
CSeq: 101 ACK
Sequence Number: 101
Method: ACK
Max-Forwards: 70
Contact: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
Contact Binding: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
URI: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
SIP Display info: "SPA8k8Phone1"
SIP contact address: sip:101@192.168.2.237:5060
User-Agent: Cisco/SPA8800-6.1.7(GW)
Content-Length: 0
Frame 80 (1250 bytes on wire, 1250 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: INVITE sip:102@192.168.2.20 SIP/2.0
Method: INVITE
[Resent Packet: False]
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5060;branch=z9hG4bK-e5988af5
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5060
Branch: z9hG4bK-e5988af5
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=377ea678f1613b1o0
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: 377ea678f1613b1o0
To: <sip:102@192.168.2.20>
SIP to address: sip:102@192.168.2.20
Remote-Party-ID: "SPA8k8Phone1" <sip:101@192.168.2.20>;screen=yes;party=calling
Call-ID: c677a744-912e2955@192.168.2.237
CSeq: 102 INVITE
Sequence Number: 102
Method: INVITE
Max-Forwards: 70
Proxy-Authorization: Digest
username="101",realm="asterisk",nonce="111dc491",uri="sip:102@192.168.2.20",algorithm=MD5,resp
onse="89c9bfa2d386061dad5b67972ddd3ec4"
Authentication Scheme: Digest
Username: "101"
Realm: "asterisk"
Nonce Value: "111dc491"
Authentication URI: "sip:102@192.168.2.20"
Algorithm: MD5
Digest Authentication Response: "89c9bfa2d386061dad5b67972ddd3ec4"
Contact: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
Contact Binding: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
URI: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
SIP Display info: "SPA8k8Phone1"
SIP contact address: sip:101@192.168.2.237:5060
Expires: 240
User-Agent: Cisco/SPA8800-6.1.7(GW)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura, replaces
Content-Type: application/sdp
Message Body
Frame 81 (470 bytes on wire, 470 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol

Other manuals for Cisco SPA8800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA8800 and is the answer not in the manual?

Cisco SPA8800 Specifications

General IconGeneral
BrandCisco
ModelSPA8800
CategoryGateway
LanguageEnglish

Related product manuals