EasyManuals Logo

Cisco SPA8800 Configuring

Cisco SPA8800
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 53 of 69
Session Name (s): -
Connection Information (c): IN IP4 192.168.2.237
Time Description, active time (t): 0 0
Media Description, name and address (m): audio 16420 RTP/AVP 0 2 4 8 18 96 97 98
100 101
Media Attribute (a): rtpmap:0 PCMU/8000
Media Attribute (a): rtpmap:2 G726-32/8000
Media Attribute (a): rtpmap:4 G723/8000
Media Attribute (a): rtpmap:8 PCMA/8000
Media Attribute (a): rtpmap:18 G729a/8000
Media Attribute (a): rtpmap:96 G726-40/8000
Media Attribute (a): rtpmap:97 G726-24/8000
Media Attribute (a): rtpmap:98 G726-16/8000
Media Attribute (a): rtpmap:100 NSE/8000
Media Attribute (a): fmtp:100 192-193
Media Attribute (a): rtpmap:101 telephone-event/8000
Media Attribute (a): fmtp:101 0-15
Media Attribute (a): ptime:30
Media Attribute (a): sendrecv
Frame 2 (559 bytes on wire, 559 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Status-Line: SIP/2.0 407 Proxy Authentication Required
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5060;branch=z9hG4bK-61c59e9d;received=192.168.2.237
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5060
Branch: z9hG4bK-61c59e9d
Received: 192.168.2.237
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=432331171f77868do0
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: 432331171f77868do0
To: <sip:85551313@192.168.2.20>;tag=as0f213285
SIP to address: sip:85551313@192.168.2.20
SIP tag: as0f213285
Call-ID: c6e3a35f-e0a478e5@192.168.2.237
CSeq: 101 INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Proxy-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="05ce1ccc"
Authentication Scheme: Digest
Algorithm: MD5
Realm: "asterisk"
Nonce Value: "05ce1ccc"
Content-Length: 0
Frame 3 (445 bytes on wire, 445 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: ACK sip:85551313@192.168.2.20 SIP/2.0
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5060;branch=z9hG4bK-61c59e9d
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5060
Branch: z9hG4bK-61c59e9d
From: "SPA8k8Phone1" <sip:101@192.168.2.20>;tag=432331171f77868do0
SIP Display info: "SPA8k8Phone1"
SIP from address: sip:101@192.168.2.20
SIP tag: 432331171f77868do0
To: <sip:85551313@192.168.2.20>;tag=as0f213285
SIP to address: sip:85551313@192.168.2.20
SIP tag: as0f213285
Call-ID: c6e3a35f-e0a478e5@192.168.2.237
CSeq: 101 ACK
Max-Forwards: 70
Contact: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
Contact Binding: "SPA8k8Phone1" <sip:101@192.168.2.237:5060>
User-Agent: Cisco/SPA8800-6.1.7(GW)
Content-Length: 0
Frame 4 (1272 bytes on wire, 1272 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)

Other manuals for Cisco SPA8800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA8800 and is the answer not in the manual?

Cisco SPA8800 Specifications

General IconGeneral
BrandCisco
ModelSPA8800
CategoryGateway
LanguageEnglish

Related product manuals