EasyManua.ls Logo

Cisco SPA8800

Cisco SPA8800
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring the Cisco SPA8800 IP Telephony Gateway in an Asterisk Environment
© 2009 Cisco Systems, Inc. All rights reserved. Page 66 of 69
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Message Header
Call-ID: 65f7d74a435b5be15c73d1341625c0c5@192.168.2.20
CSeq: 102 OPTIONS
Sequence Number: 102
Method: OPTIONS
From: "asterisk" <sip:asterisk@192.168.2.20>;tag=as584485d8
SIP Display info: "asterisk"
SIP from address: sip:asterisk@192.168.2.20
SIP tag: as584485d8
To: <sip:sip.broadvoice.com>
SIP to address: sip:sip.broadvoice.com
Via: SIP/2.0/UDP
192.168.2.20:5060;branch=z9hG4bK178d807d;received=24.153.145.213;rport=33579
Transport: UDP
Sent-by Address: 192.168.2.20
Sent-by port: 5060
Branch: z9hG4bK178d807d
Received: 24.153.145.213
RPort: 33579
Supported: 100rel
Allow: INVITE, BYE, ACK, OPTIONS, CANCEL, PRACK
Accept: application/sdp
Accept-Encoding:
Accept-Language: en
Content-Length: 0
Frame 17 (379 bytes on wire, 379 bytes captured)
Ethernet II, Src: 00:24:97:f0:50:3c (00:24:97:f0:50:3c), Dst: Internet_1c:33:a1
(00:e0:4d:1c:33:a1)
Internet Protocol, Src: 192.168.2.237 (192.168.2.237), Dst: 192.168.2.20 (192.168.2.20)
User Datagram Protocol, Src Port: 5161 (5161), Dst Port: sip (5060)
Session Initiation Protocol
Request-Line: BYE sip:101@192.168.2.20 SIP/2.0
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5161;branch=z9hG4bK-cdeab552
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5161
Branch: z9hG4bK-cdeab552
From: "SPA8k8Line2" <sip:pstn2@192.168.3.2>;tag=26caa2f219d9f62eo1
SIP Display info: "SPA8k8Line2"
SIP from address: sip:pstn2@192.168.3.2
SIP tag: 26caa2f219d9f62eo1
To: <sip:101@192.168.2.20>;tag=as7788891d
SIP to address: sip:101@192.168.2.20
SIP tag: as7788891d
Call-ID: ab1e6542-d868981e@192.168.3.2
CSeq: 102 BYE
Sequence Number: 102
Method: BYE
Max-Forwards: 70
User-Agent: Cisco/SPA8800-6.1.7(GW)
Content-Length: 0
Frame 18 (477 bytes on wire, 477 bytes captured)
Ethernet II, Src: Internet_1c:33:a1 (00:e0:4d:1c:33:a1), Dst: 00:24:97:f0:50:3c
(00:24:97:f0:50:3c)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.237 (192.168.2.237)
User Datagram Protocol, Src Port: sip (5060), Dst Port: 5161 (5161)
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Message Header
Via: SIP/2.0/UDP 192.168.2.237:5161;branch=z9hG4bK-cdeab552;received=192.168.2.237
Transport: UDP
Sent-by Address: 192.168.2.237
Sent-by port: 5161
Branch: z9hG4bK-cdeab552
Received: 192.168.2.237
From: "SPA8k8Line2" <sip:pstn2@192.168.3.2>;tag=26caa2f219d9f62eo1
SIP Display info: "SPA8k8Line2"
SIP from address: sip:pstn2@192.168.3.2
SIP tag: 26caa2f219d9f62eo1
To: <sip:101@192.168.2.20>;tag=as7788891d
SIP to address: sip:101@192.168.2.20
SIP tag: as7788891d
Call-ID: ab1e6542-d868981e@192.168.3.2
CSeq: 102 BYE
Sequence Number: 102
Method: BYE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Contact: <sip:101@192.168.2.20>

Other manuals for Cisco SPA8800

Related product manuals