124-Port 10/100 + 2-Port Gigabit Switch + 2 MiniGBIC
Chapter 1: Introduction
Chapter 1:
Introduction
The 24-Port 10/100 + 2-Port Gigabit Switch + 2
MiniGBIC
This new Linksys rack-mount switch delivers non-blocking, wire speed
switching for your 10/100 Mbps network clients, plus multiple options
for connecting to your network backbone. Twenty-four 10/100 ports
wire-up your workstations, while the integrated 10/100/1000 ports or
miniGBIC ports connect to your servers or backbone at Gigabit speeds.
The SR224G incorporates non-blocking, wire-speed architecture that
forwards packets as fast as your network can deliver them. It features
broadcast storm suppression that maximizes the system availability.
Also included are Address Learning and Aging function to prevent data
transfer errors and Data Flow Control to help prevent packet loss.
All ports have automatic MDI/MDI-X crossover detection, so you don’t
have to worry about the cable type. Each port independently and
automatically negotiates for best speed and whether to run in half- or
full-duplex mode. Head-of-line blocking prevention keeps your high-
speed clients from bogging down in lower-speed traffic and fast store-
and-forward switching prevents damaged packets from being passed
on into the network.
No matter how intensive your network demands, the Linksys 24-Port
10/100 + 2-Port Gigabit Switch + 2 MiniGBIC has speed, flexibility, and
reliability that you can count on.
To Next Page
Loading...
