Cisco TelePresence IX5000 First-Time Setup

26
Cisco TelePresence IX5000 and IX5200 First-Time Setup
OL-27038-01
Performing First-Time Setup
b. Click Capture.
c. If the whiteboard is properly selected, and if the whiteboard is completely in the view of a single
camera, click Select Whiteboard. If the image is not properly selected, move the targets and click
Re-Capture.
Note If the whiteboard setup fails, increase the amount of lighting to the whiteboard until the red targets are
recognized by the system. For more information about whiteboard lighting requirements, see
“Troubleshooting Whiteboard Setup Issues” section on page 14.

Cisco TelePresence IX5000 Specifications

General

Brand	Cisco
Model	TelePresence IX5000
Category	Conference System
Language	English