Cisco TelePresence IX5200 First-Time Setup

33
Cisco TelePresence IX5000 and IX5200 First-Time Setup
OL-27038-01
Performing First-Time Setup
Step 15 Make sure that the room is quiet and click Continue to start the noise level test. Remain quiet during the
test.
Note This test takes up to five minutes to complete.
Step 16 When the noise level test completes, click Continue.
Tip After you run the noise level and reverberation tests, download and view the results by completing the
steps in the “Retrieving and Reading the Results of the Noise Level and Reverberation Tests” section on
page 39.

Cisco TelePresence IX5200 Specifications

General

Brand	Cisco
Model	TelePresence IX5200
Category	Conference System
Language	English