Cisco TelePresence IX5200 First-Time Setup

7
Cisco TelePresence IX5000 and IX5200 First-Time Setup
OL-27038-01
Powering on the System and Enabling the Cisco TelePresence Administration Software GUI
Figure 1 MAC Address Location on the Codec
Powering on the System and Enabling the Cisco TelePresence
Administration Software GUI
To load the CTS Administration Software, complete the following steps:
Step 1 Power on the system by completing the following steps.
Note If your system is already powered on, skip the step and proceed to Step 2.

Cisco TelePresence IX5200 Specifications

General

Brand	Cisco
Model	TelePresence IX5200
Category	Conference System
Language	English