Cisco TelePresence MX300 G2 Getting Started Guide

Configuration using the Touch controller
Waking up the system
If no menu is displayed on the Touch controller, tap the display
to wake up the system.
If the system does not wake up:
• Make sure the Touch controller is connected to the main unit.
• Make sure the main unit is connected to power and
switched on.
If the system has just been switched on, wait a few minutes to
allow the system to start up.
If in doubt, read the installation guide for your product.
Touch controller
Back to task overview
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
12
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Configuration

Cisco TelePresence MX300 G2 Specifications

General

Resolution	1920 x 1080 (Full HD)
Display Size	55-inch
Audio	Integrated speakers
Microphone	Integrated microphones
Network Connectivity	Ethernet
Video Standards	H.264, H.265
Video Inputs	HDMI
Control Interface	Cisco Touch 10
Audio Standards	G.711, G.722, G.722.1
Network Protocols	H.323, SIP
Connectivity	Bluetooth, USB, HDMI
Weight	10 kg