Cisco TelePresence SX20 Quick Set

78-20385-02B SX20 Quick Set Installation Sheet | 2015 MARCH | © 2011-2015 Cisco Systems, Inc. All rights reserved.
Installing Cisco TelePresence SX20 Quick Set
Connecting the cables
Connect all cables as illustrated.
Caution: Make sure all units are switched off when connecting or
disconnecting devices.
If connecting an external loudspeaker, please take care to use
an active speaker (built-in amplifier). Use an ungrounded (float-
ing) speaker to avoid ground loop noise.
Connect one or two Cisco Table Microphone 20 microphones to
your codec.
Connect the codec to LAN/Ethernet.
Connect your primary display to the blue colored HDMI socket.
With the dual display option, connect the second display to the
other HDMI output.
Connect your camera (option A, B or C) to the codec.
Connect a PC (video and audio) to be able to share
presentations (either locally or with remote participants).
Always use the provided Lite-On PA-1600-2A-LF power supply
(Input: 2 A, 100-240 V, 50-60 Hz; Output: 5.0 A, 12.0 V).
2
4
1
3
5
HDMI
Camera option A:
PrecisionHD 1080p 12X
Camera option B:
PrecisionHD 1080p 4XS2
2
1 4
67
3 5
6
7
Camera option C:
PrecisionHD 1080p 2.5X
Starting to use the system
If the codec is not starting automatically, press the power
button to switch it on. When the button lights steadily the
system is ready for configuration. This may take a few minutes.
Before you can make a call, you must configure the system as
described in the Getting Started Guide available on our web site.
See overleaf where to find the user guides online.
Ventilation
Do not block any ventilation openings;
minimum 8 cm / 3.15 in. free space.

Cisco TelePresence SX20 Specifications

General

Digital zoom	5 x
Optical zoom	2.5 x
Aspect ratio	16:9
Supported video modes	1080p, 576p, 720p
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 720 x 480, 720 x 576, 1280 x 768, 1280 x 800, 1280 x 960, 1024 x 576 (WSVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Line-in	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Voice codecs	G.711, G.722, G.722.1

Weight and Dimensions

Depth	180 mm
Width	300 mm
Height	34 mm
Weight	1400 g