EasyManuals Logo

Cisco TelePresence System Codec C-Series Reference Guide

Cisco TelePresence System Codec C-Series
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 94
Cisco TelePresence System Codec C40/C60 API Reference Guide
xCommand Audio RemoteOutput UpdateInputGain
Update the gain of a local or remote input connected to a remote output.
OutputId: A unique identifier for the local output.
InputId: A unique identifier for the local or remote input.
InputGain: Set a gain on the input signal in the range from -54dB to 15dB. The value -54dB equals
Off.
Requires user role: ADMIN
Parameters:
OutputId(r): <0..65534>
InputId(r): <0..65534>
InputGain: <-54..15>
Example:
xCommand Audio RemoteOutput UpdateInputGain OutputId:6 InputId:3
OK
*r AudioRemoteOutputGroupUpdateInputGainResult (status=OK):
** end
xCommand Audio RemoteOutput DisconnectInput
Disconnect a local or remote input from a remote output with their IDs as parameters.
OutputId: A unique identifier for the local output.
InputId: A unique identifier for the local or remote input.
Requires user role: ADMIN
Parameters:
OutputId(r): <0..65534>
InputId(r): <0..65534>
Example:
xCommand Audio RemoteOutput DisconnectInput OutputId:10 InputId:8
OK
*r AudioRemoteOutputGroupDisconnectInputResult (status=OK):
** end
xCommand Audio Setup Clear
Remove all local inputs and local outputs.
Requires user role: ADMIN
Example:
xCommand Audio Setup Clear
*r AudioSetupClearResult (status=OK):
** end
xCommand Audio Sound Play
Play a specified audio sound.
Requires user role: USER
Parameters:
Sound(r): <Bump/Busy/CallDisconnect/CallInitiate/CallWaiting/Dial/KeyInput/KeyTone/Nav/
NavBack/Notification/OK/PresentationConnect/Ringing/SpecialInfo/TelephoneCall/VideoCall/
Volume>
Loop: <On/Off>
Example:
xCommand Audio Sound Play Sound: Ringing
*r AudioSoundPlayResult (status=OK):
** end
xCommand Audio Sound Stop
Stop playing audio sound.
Requires user role: USER
Example:
xCommand Audio Sound Stop
*r AudioSoundStopResult (status=OK):
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand

Other manuals for Cisco TelePresence System Codec C-Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence System Codec C-Series and is the answer not in the manual?

Cisco TelePresence System Codec C-Series Specifications

General IconGeneral
BrandCisco
ModelTelePresence System Codec C-Series
CategoryConference System
LanguageEnglish

Related product manuals