Cisco TelePresence System Codec C60 Reference Guide

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 198
Cisco TelePresence System Codec C40/C60 API Reference Guide
xStatus SIP Profile 1 DirectoryURI Primary URI
Returns the primary directory URI set for the endpoint in UCM. Directory URI is associated with a
directory number, and can be used to make calls and identify callers. Up to five directory URIs can
be set, but only one of them can be set as primary.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile DirectoryURI Primary URI
*s SIP Profile 1 DirectoryURI Primary URI: "123456@company.com"
** end
Standby status
xStatus Standby Active
Shows if the system is in standby or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Standby Active
*s Standby Active: Off
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence System Codec C60 Specifications

General

Brand	Cisco
Model	TelePresence System Codec C60
Category	Conference System
Language	English