Cisco TelePresence System Codec C60 Reference Guide

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 218
Cisco TelePresence System Codec C40/C60 API Reference Guide
Adding a startup script
The startup script can be used to execute certain
commands from the API during boot up. To enable this
feature one must log in to the codec as root and follow
the steps below.
Login to the codec
1. Connect to the codec through the network, using a
command line interface (SSH, Telnet or SCP) and
login as root
2. Make a user directory using the following command:
“ mkdir /user/scripts.d ”
3. Put an executable file (permission must be changed to
executable) in this directory.
Example of the text in such a file:
#!/usr/bin/env tsh
xCommand Audio LocalInput Update InputId:
1 MixerMode:Fixed
The startup script file
• The file must start with the following sequence:
#!/usr/bin/env tsh
• The file can contain any xCommand or xConfiguration
command
• The system executes the commands and
configurations in sequence.
• The file can have any name as long as it is placed in
this directory.
• For multiple commands you must use Unix end of line
(LF). Windows end of line does not work.
About startup scripts
You can add a startup script on the codec to execute certain
commands from the API during boot up.
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
Appendices

Cisco TelePresence System Codec C60 Specifications

General

Brand	Cisco
Model	TelePresence System Codec C60
Category	Conference System
Language	English