EasyManuals Logo
Home>Cisco>Conference System>TelePresence System Codec C60

Cisco TelePresence System Codec C60 Reference Guide

Cisco TelePresence System Codec C60
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 90
Cisco TelePresence System Codec C40/C60 API Reference Guide
xCommand Audio LocalInput Update
Update the settings of the local input given by the input ID.
InputId: A unique identifier for the local input.
Name: Choose a name that describes the mix of input connectors.
MixerMode Auto: The microphone with the strongest speaker is active and the others are strongly
attenuated.
MixerMode Fixed: The input connector signals are mixed together with equal gains.
MixerMode GainShared: The microphones are given a normalized gain factor relative to the
strongest speaker before being mixed together.
AGC: Automatic Gain Control.
Mute: Mutes the mix of input connectors.
Channels: Set channels to 1 to mix the input connectors into a mono signal. To mix the input
connectors into a stereo signal, set channels to 2.
Requires user role: ADMIN
Parameters:
InputId(r): <0..65534>
Name(r): <S: 0, 255>
MixerMode(r): <Auto/Fixed/GainShared>
AGC(r): <On/Off>
Mute(r): <On/Off>
Channels(r): <1..2>
Example:
xCommand Audio LocalInput Update InputId: 2 Name: "Microphone" MixerMode:
GainShared AGC: Off Mute: Off Channels: 1
OK
*r AudioInputGroupUpdateResult (status=OK):
** end
xCommand Audio LocalInput Remove
Remove the local input given by the input ID.
InputId: A unique identifier for the local input.
Requires user role: ADMIN
Parameters:
InputId(r): <0..65534>
Example:
xCommand Audio LocalInput Remove InputID: 2
OK
*r AudioInputGroupRemoveResult (status=OK):
** end
xCommand Audio LocalInput AddConnector
Attach an input connector to the local input given by the input ID. A connector is defined by its type
and ID.
InputId: A unique identifier for the local input.
ConnectorType: Select the connector type.
ConnectorId: Select a connector.
Requires user role: ADMIN
Parameters:
InputId(r): <0..65534>
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio LocalInput AddConnector InputId: 3 ConnectorType: Line
ConnectorId: 1
OK
*r AudioInputGroupAddConnectorResult (status=OK):
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand

Other manuals for Cisco TelePresence System Codec C60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence System Codec C60 and is the answer not in the manual?

Cisco TelePresence System Codec C60 Specifications

General IconGeneral
BrandCisco
ModelTelePresence System Codec C60
CategoryConference System
LanguageEnglish

Related product manuals