Cisco TelePresence System Codec C60

D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014. Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved. 97
Cisco TelePresence System Codec C40/C60 API Reference Guide
xCommand Bookings Clear
Clear the current stored list of bookings.
Requires user role: USER
Example:
xCommand Bookings Clear
** end
OK
Boot commands
xCommand Boot
Reboot system.
Action: As a default the system restarts after a reboot. By selecting Shutdown, the system will not
restart.
Requires user role: USER
Parameters:
Action: <Restart/Shutdown>
Example:
xCommand Boot
*r BootResult (status=OK):
** end
OK
CUIL reboot request, restarting
Connection closed by foreign host.
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand