If you purchased this product through a Cisco reseller, contact the reseller directly for technical
support. If you purchased this product directly from Cisco, contact Cisco Technical Support at this
URL: http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html.
Note
Step 9 Verify that the system software has booted and that the system has initialized without error messages.
If you cannot resolve an issue, contact your customer service representative.
Step 10 Complete the worksheets provided in Site Preparation Checklist for future reference.
Step 11 Configure the primary fabric interconnect as described in thr Configuration Guide for the version of Cisco
UCS Manager that you are using. The configuration guides are available at this URL: http://www.cisco.com/
c/en/us/support/servers-unified-computing/ucs-manager/products-installation-and-configuration-guides-list.html
Step 12 Repeat this procedure for the secondary fabric interconnect.
Cisco UCS 6400 Series Fabric Interconnect Hardware Installation Guide
26
Installing the Cisco UCS Fabric Interconnect
Starting the System
To Next Page
Loading...
Need help?
General
