Cisco Wap581 User Manual

Quick Start Guide
Cisco WAP581 Wireless-AC/N Dual Radio
Access Point with 2.5GbE LAN
Welcome
Thank you for choosing the Cisco WAP581 Wireless-AC/N Dual Radio Wave 2 Access
Point with 2.5GbE LAN. The Cisco WAP581 is an indoor dual radio 802.11acWave2 +
802.11acWave1 access point with Power over Ethernet (PoE). -PoE Supplied by UL
Listed I.T.E.
NOTE The unit should be connected to PoE networks only, without routing to the
outside plant.
This guide is designed to familiarize you with the general layout of the access point,
describe how to deploy the device in your network, and describe how to configure
the device. Your access point has more features and functionality than what is
described in this guide. For additional information, see the Administration Guide. A

Cisco Wap581 Specifications

General

Brand	Cisco
Model	Wap581
Category	Wireless Access Point
Language	English

Summary

Prerequisites for Installation

Before You Begin

Details the necessary equipment and services required before starting the installation.

Mounting and Placement Guide

Wall and Ceiling Mounting

Details the process and components for wall or ceiling mounting using the provided kit.

Connecting the WAP581

Verifying Installation

Initial Device Configuration

Troubleshooting Installation Issues

Troubleshooting Common Issues

Covers common installation failures like no power, bad connections, bad image, and IP address issues.

Rebooting and Factory Default Settings