Need help?Do you have a question about the Cisco WAP351 and is the answer not in the manual?
General| Model | WAP351 |
|---|---|
| Wireless Standards | IEEE 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| VLAN Support | Yes |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Power over Ethernet (PoE) | Yes (802.3af) |
| Security | WPA, WPA2 |
| Management | SNMP |
| Antennas | Internal |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Quality of Service (QoS) | Yes |
| Mounting | Wall or ceiling |
| Maximum Data Rate | 300 Mbps on 2.4 GHz, 450 Mbps on 5 GHz |
Describes the lights on the front of the Cisco WAP351.
Details the ports and buttons on the back of the Cisco WAP351.
Explains the Kensington lock slot on the side of the Cisco WAP351.
Lists default network parameters like username, password, and IP address.
Provides guidance on optimal placement for temperature and airflow.
Instructions for mounting the Cisco WAP351 to a wall or ceiling.
Guidance on diagnosing and resolving installation and connectivity issues.
Lists common reasons for installation problems and how to address them.
Provides links to Cisco support resources and contact information.
Links to additional documentation like the Administration Guide.
To Next Page
