Cisco WAP125 User Manual

Quick Start Guide
Cisco WAP125 Wireless-AC/N Dual Band
Desktop Access Point with PoE
Welcome
Thank you for choosing the Cisco WAP125 Wireless-AC/N Dual Band Desktop Access
Point with PoE. The Cisco WAP125 is an indoor concurrent dual-band radio
802.11ac and 802.11n access point with Power over Ethernet (PoE). -PoE Supplied
by UL Listed I.T.E.
NOTE The unit should be connected to PoE networks only, without routing to the
outside plant.
This guide provides the general layout of the Cisco WAP125, describe how to deploy
the Cisco WAP125 in your network, and describe how to configure the Cisco WAP125.
For additional information, see www.cisco.com/go/100_wap_resources.

Cisco WAP125 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Modulation	16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK
Number of users	64 user(s)
Networking standards	IEEE 802.3af, IEEE 802.11ac
Spread spectrum method	DSSS, OFDM
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	867 Mbit/s
Security algorithms	WPA, WPA2
Number of SSID supported	8
Supported network protocols	IPv6, NTP, HTTP, HTTPS
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Output current	1 A
Output voltage	12 V
Power plug type	Type C
AC input voltage	100 - 240 V
AC input frequency	50 Hz
Placement	Desk
Certification	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, FCC 15.247, 15.407; RSS-210; EN 300.328, EN 301.893; AS/NZS 4268.2003; FCC 15.107 15.109, ICES-003, EN 301.489-1 -17
Product color	White
Recommended usage	Indoor
Cable lock slot type	Kensington
Antenna type	Internal
Antenna gain level (max)	5.63 dBi
Flash memory	128 MB
Internal memory	256 MB
Operating system installed	Linux
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Country of origin	China
Quantity per pack	1 pc(s)
Package depth	188.976 mm
Package width	168.91 mm
Package height	80.01 mm
Package weight	1133.98 g

Weight and Dimensions

Width	123.19 mm
Height	31.75 mm
Weight	303.91 g

Summary

Welcome

Package Contents

Before You Begin

Cisco WAP125 Features

Front Panel Features

Describes the system LED on the front panel for status indications.

Back Panel Features

Details the RESET button and the Gigabit Ethernet (PoE) LAN port.

Default Settings

Mounting and Placement

Placement Tips

Provides advice on ambient temperature, airflow, and mechanical stability for optimal placement.

Connecting the Cisco WAP125

Verifying Hardware Installation

Getting Started with Configuration

Troubleshooting Guide

Installation Failure Causes

Incorrect IP Address Issues

Rebooting and Factory Reset

Support and Resources

Regulatory Compliance

FCC Statement and Caution

Details FCC interference statement, caution on modifications, and compliance rules.

IC Statement Compliance

Japan Statement Compliance