Cisco WAP125 Quick Start Guide 8
a. The wireless access points can be accessed and managed by
Cisco network tools and services including the Cisco FindIT Network
Discovery Utility that enables you to automatically discover all
supported Cisco devices in the same local network segment as your
computer. You can get a snapshot view of each device or launch the
product configuration utility to view and configure the settings. For
more information, see www.cisco.com/go/findit.
b. The wireless access points are Bonjour-enabled and automatically
broadcast their services and listen for services being advertised by
other Bonjour-enabled devices. If you have a Bonjour-enabled
browser, such as Microsoft Internet Explorer with a Bonjour plug-in, or
the Apple Mac Safari browser, you can find the wireless access point
on your local network without knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple’s website by visiting:
http://www.apple.com/bonjour/
c. Locate the IP address assigned by your DHCP server by accessing your
router or DHCP server. See your DHCP server instructions for more
information.
STEP 3 Launch a web browser, such as Microsoft Internet Explorer or Mozilla Firefox.
STEP 4 In the Address field, enter the default DHCP address and press the Enter key.
STEP 5 Enter the default user name of cisco and password of cisco in the User Name
and Password fields.
STEP 6 Click Login. The Wireless Access Point Setup Wizard appears.
STEP 7 Follow the Setup Wizard instructions to finish the WAP device installation. We
strongly recommend that you use the Setup Wizard for the first
installation.The Setup Wizard turns on the Wi-Fi radio, which allows you to
connect wirelessly. For more advanced configurations, see the
Administration Guide. A link to the Administration Guide is found in ,
page11.
Congratulations, you can now start using your wireless access point.
To Next Page
Loading...
Need help?
General
