EasyManua.ls Logo

Cisco WRP400 - Japanese Electric Appliance and Radio Laws; National Restrictions

Cisco WRP400
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Regulatory Compliance and Safety Information for the Cisco WRP400 Wireless-G Broadband Router with 2 Phone Ports
78-20472-01
Japanese Electric Appliance and Radio Laws
Japanese Electric Appliance and Radio Laws
Statement 371—Power Cable and AC Adapter
Radio Models (Models Fitted with Antenna or Antenna
Connectors)
The following CE mark is affixed to the equipment and packaging:
National Restrictions
Table 2 provides an overview of the regulatory power limits applicable for the 2.4-GHz and 5.0-GHz
bands.
Warning
When installing the product, please use the provided or designated connection cables/power
cables/AC adaptors/batteries. Using any other cables/adaptors could cause a malfunction or a
fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that
have the “UL” or “CSA” shown on the cord), not regulated with the subject law by showing
"PSE" on the cord, for any other electrical devices than products designated by CISCO.
Table 2 RCSI Power Limits
Frequency Band
(MHz)
Max Power Level (EIRP)
(mW) Indoor Only Indoor and Outdoor
2400-2483.5 100 X
5150-5350
1
1. Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) are required in the 5250- to 5350-GHz and 5470- to
5725-GHz range
200 X
5470-5725
1
1000 X

Other manuals for Cisco WRP400

Related product manuals