Cisco WRT610N Quick Installation Guide

Chapter 3
Advanced Configuration
27
Simultaneous Dual-N Band Wireless Router
Category
There are four categories available. Select one of the
following: Applications, Online Games, MAC Address,
Ethernet Port, or Voice Device. Proceed to the instructions
for your selection.
Applications
Applications Select the appropriate application. If you
select Add a New Application, follow the instructions in the
“Add a New Application “section.
Priority Select the appropriate priority: High, Medium,
Normal, or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.
Add a New Application
Add a New Application
Enter a Name Enter a name for this application.
Port Range Enter the port range that the application
will be using. For example, if you want to allocate
bandwidth for FTP, you can enter 21-21. If you need
services for an application that uses from 1000 to 1250,
you enter 1000-1250 as your settings. You can have up
to three ranges to define for this bandwidth allocation.
Port numbers can range from 1 to 65535. Check your
application’s documentation for details on the service
ports used.
Select the protocol TCP or UDP, or select Both.
Priority Select the appropriate priority: High, Medium,
Normal, or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.
Online Games
Online Games
Games
Games Select the appropriate game. If you select Add
a New Game, follow the instructions in the “Add a New
Game section”.
Priority Select the appropriate priority: High, Medium,
Normal, or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.
Add a New Game
Enter a Name Enter any name to indicate the name of
the entry.
Port Range Enter the port range that the application will
be using. For example, if you want to allocate bandwidth
for FTP, you can enter 21-21. If you need services for an
application that uses from 1000 to 1250, you enter 1000-
1250 as your settings. You can have up to three ranges
to define for this bandwidth allocation. Port numbers
can range from 1 to 65535. Check your application’s
documentation for details on the service ports used.
Select the protocol TCP or UDP, or select Both.
Priority Select the appropriate priority: High, Medium,
Normal, or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.

Cisco WRT610N Specifications

General

Brand	Cisco
Model	WRT610N
Category	Wireless Router
Language	English