Appendix B
How to Install and Access USB Storage
34
Simultaneous Dual-N Band Wireless Router
Appendix B: How to Install
and Access USB Storage
Overview
This appendix explains how to connect and access an
external USB storage device.
How to Install the USB Storage
Make sure your computer has a wired or wireless 1.
connection to the Router.
Connect an external USB hard drive or USB flash disk 2.
to the USB port of the Router.
Proceed to the next section, “How to Access the USB 3.
Storage”.
How to Access the USB Storage
Follow the instructions for your Windows operating
system, XP or Vista.
Instructions for Windows XP
Click 1. Start.
Click 2. Search.
Click Search
Click 3. Computers or people.
Click Computers or People
Click 4. A computer on the network.
Click A Computer on the Network
In the 5. Computer name field, enter the server name
that you created on the Storage > Administration
screen. The default server name is WRT610N. See the
Advanced Configuration section later in this Appendix
for information on how to change the server name.
Then click Search.
Enter Server Name
To Next Page
Loading...
Need help?
General
