To Next PageTo Next Page
Need help?Do you have a question about the Cissell FMMAN58 and is the answer not in the manual?
Instructions for installing the machine, referencing an illustration sheet.
Steps for testing the machine's operation after installation.
Adjusting air pressure for proper garment tension.
Regulating nylon bag size at waist, hem, and lower positions.
Adjusting waist line expansion of the nylon bag.
Adjusting hem line expansion of the nylon bag.
Adjusting hip area fullness and bag size at the hem line.
Adjusting effective sleeve length using rings on bag sleeves.
Adjusting the form’s shoulder width.
Controls for the fan motor operation.
Controls the sequence of steam and air operations.
Allows manual control of air inflation and deflation.
Initiates the automatic operating cycle.
Sets the duration for the steam cycle.
Sets the duration for the air cycle.
Using the water spray gun for difficult wrinkles.
Advice for maximizing production efficiency.
Step-by-step guide for removing the nylon bag.
Step-by-step guide for installing a new nylon bag.
Lubrication procedures for internal bearing surfaces.
Steps for replacing the metallic steam spreader.
Lubrication procedures for external bearing points.
Troubleshooting guide for a form that drags on the base.
Troubleshooting guide for a form that rides too high.
Procedure for adjusting the air damper linkage.
Procedure for adjusting air pressure settings.
Instructions for installing the blower assembly.
Instructions for installing the motor.
Guide for aligning pulleys for proper belt function.
Importance of correct belt tension and alignment.
Details of the complete overhead water spray gun assembly.
Contents of the repair kit for the spray gun.
Description of the water hose assembly.
Specific wiring notes for different steam timer models.
Troubleshooting guide for the absence of steam.
Troubleshooting guide for a motor that fails to start.
Troubleshooting guide for a motor that runs but the cycle doesn't start.
Troubleshooting for steam cycle not maintaining.
Troubleshooting for continuous steaming.
Troubleshooting for manual air function not activating.
Troubleshooting for automatic air function not activating.
Troubleshooting for issues with the relief damper flaps.
Troubleshooting for automatic air function not stopping.
Troubleshooting for bag inflation issues.
Troubleshooting for bag deflation issues.
Troubleshooting for insufficient steam.
Troubleshooting for insufficient air.
Troubleshooting for excessive noise or vibration.
General