Using the R-2 timer
10-minute timer
timer standby mode: BLUE
x
Switching to the 5-minute timer is possible only while the stopwatch is
running.
x
Elapsed time display changes as watch switches from timer to stopwatch:
Stopwatch minutes-read off the circular graphic display minute scale
Stopwatch seconds - read off the second hand
x In timer standby mode, the current time is displayed.
x
When the timer is running, the hour/minute hands display the current time;
the second hand displays the timer countdown in seconds.
x
Once the timer is started, it will compensate for time lost while the
graphic display panel moves (if switched while stopwatch is stopped, timer
into the correct position. Elapsed time data is accurately displayed on the
graphic display panel.
Press and hold down for more
than 1 second
Return to Table of Contents
Return to Table of Contents
To Next Page
Loading...
