3. How to use the Rotating Bezel to
measure time
<To check the elapsed time>
Align the zero mark “1) ” of the
rotating bezel with the position of the
minute hand.
Then, read the scale above the rotating 2)
bezel, to which the minute hand points
so as to gure out the elapsed time.
As shown in the illustration, the
elapsed time is 10 minutes.
Minute hand
Time
elapsed
<To check the remaining time>
Set the “” mark to the scheduled time.
You can now see the amount of time that •
remains until the scheduled point.
Note: The rotating bezel of Divers
watches conforming to ISO or JIS
standards, can only be rotated
counterclockwise in order to
reduce the risk of error.
Remaining
time
Minute hand
To Next Page
Loading...
Need help?
General
