63
English
Adjusting the time/calendar manually
5. Rotate the crown to adjust each setting.
• If you spin the crown quickly, the hands for the time and date will move continuously.
To slow down and stop them, slightly rotate the crown.
• To move the date forward or backward by one day, slightly rotate the crown.
• The leap year and month are indicated by the second hand. Refer to the charts on
pages 64 and 65 for proper month and leap year setting.
6. Repeat procedures 4 and 5.
A few minutes may have elapsed during setting of the calendar and the minutes may need
correction.
7. Push the crown in to position
0
to finish the setting.
The second hand starts moving from the 0 second position, and time/calendar indication
will resume.
• For the most accurate setting, push the crown when referring time source.
• The date changes at approximately 0:00 am. It takes about five seconds for the displayed
date to completely change.
To Next Page
Loading...
