Citizen ATB - Page 19

17
English
Charging your watch
◆
Checking the power reserve
Check the current power reserve.
Ⓐ
0 1 2
50
40
You can not perform this operation when using
the chronograph.
1. Ensure that the crown is in position
0
.
2. Press the lower right button
Ⓐ
.
The chronograph minute hand moves to indicate
the power reserve.
• Fordetailsonthepowerreservelevel,seethe
next page.
3. Press the lower right button
Ⓐ
to finish the
check procedure.
• Thecurrenttimeindicationwillresume
automatically when leaving the watch for
approx. 10 seconds.