Citizen ATB - Checking the Time Signal Reception

41
English
1. Ensure that the crown is in position
0
.
2. Press the lower right button
Ⓐ
.
The chronograph 1/20 second hand indicates the
signal reception result.
• 
For details on the reception result, see the next page.
3. Press the lower right button
Ⓐ
to finish the
check procedure.
• Thecurrenttimeindicationwillresume
automatically when leaving the watch for approx.
10 seconds.
Check the result of the last signal reception.
Checking the time signal reception
Ⓐ
0 1 2
S
OK
RX
NO
M
T
W
T
F
S
OK
RX
NO
20
30
80
90
60
70
You can not perform this operation when using
the chronograph.