Citizen C320 Abbreviated Instruction

C320 Abbreviated instruction
Setting the calendar
The calendar of this watch does not have to be adjusted manually until Thursday,
December 31, 2099 including leap years. (perpetual calendar)
1.
Press and release the lower right button
M
repeatedly to
move the mode hand to point to [CAL].
The calendar is indicated on the digital display.
2.
Press and release the upper right button
A
or lower left
button
C
repeatedly to indicate an area name you want on
the digital display.
3.
Pull out the lower right button
M
.
The calendar indication on the digital display starts blinking and the
calendar becomes adjustable.
4.
Press and release the upper right button
A
repeatedly to
change the target to be set.
• Each time you press the button, the target changes as follows:
Month YearDate Day of week
5.
Press and release the lower left button
C
to adjust the target.
• Pressing and holding the button changes indication continuously.
6.
Repeat steps 4 and 5 to set other targets.
7.
Push in the lower right button
M
to finish the procedure.
Switching the time of analog and digital sections
The time of the analog section cannot be adjusted directly.
Set the time of the area you want to indicate in the analog section once in the
digital section and then switch the time between the analog and digital sections.
1.
Press and release the lower right button
M
repeatedly to
move the mode hand to point to [TME] or [CAL].
2.
Press and release the upper right button
A
and lower left
button
C
at the same time.
The time of the digital and analog (hour/minute/24-hour hands) sections
switches.
Using the world time
1.
Press and release the lower right button
M
repeatedly to
move the mode hand to point to [TME] or [CAL].
The calendar is indicated on the digital display when you choose [CAL].
2.
Press and release the upper right button
A
or lower left
button
C
repeatedly to indicate an area name you want on
the digital display.
The time or calendar of the area you choose is indicated on the digital
display.
Table of time zones and representative areas
• The time zone in the table is based on UTC (Coordinated Universal Time).
• Countries or regions may change time zones for various reasons.
Time
zone
Area name Representative area
0
UTC
Coordinated Universal
Time
LON
London
+1
PAR
Paris
ROM
Rome
+2 IST
Istanbul
+3 MOW
Moscow
+4 DXB
Dubai
+5 KHI
Karachi
+6 DAC
Dhaka
+7 BKK
Bangkok
+8
SIN
Singapore
HKG
Hong Kong
Time
zone
Area name Representative area
+9 TYO
Tokyo
+10 SYD
Sydney
+11 NOU
Noumea
+12 AKL
Auckland
–10 HNL
Honolulu
–9 ANC
Anchorage
–8 LAX
Los Angeles
–7 DEN
Denver
–6 CHI
Chicago
–5 NYC
New York
–4 CCS
Caracas
–3 RIO
Rio de Janeiro
Using the zone-set function
You can hide unnecessary ones in the 23 areas and UTC, which the watch can
indicate the time of; you can also activate/deactivate summer time for those areas
separately.
1.
Press and release the lower right button
M
repeatedly to
move the mode hand to point to [SET].
2.
Pull out the lower right button
M
.
The digital display starts blinking.
3.
Press and release the upper right button
A
or lower left
button
C
repeatedly to indicate an area name you want on
the digital display.
4.
Press and release the upper left button
B
to select “SET”
(display) or “OFF” (hide) of the area.
• Each time you pres the button, “SET” and “OFF” changes alternately.
• Each time you press button
C
in this step, the summer time setting
changes alternately.
5.
Repeat steps 3 and 4 to set other areas.
6.
Push in the lower right button
M
to finish the procedure.

Citizen C320 Specifications

General

Brand	Citizen
Model	C320
Category	Watch
Movement	Quartz
Case Material	Stainless Steel
Band Material	Stainless Steel
Dial Color	Black