Citizen C460 Abbreviated Instruction

C460 Abbreviated instruction
Using the zone-set function
You can hide unnecessary ones in the 30 areas and UTC, which the watch can
indicate the time of; you can also activate/deactivate summer time for those areas
separately.
• Press button
M
to cancel setting.
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the upper left button
M
repeatedly to change
the mode to [SET].
2.
Press and release the lower left button
B
repeatedly to choose
an area name on the digital display 2.
• Pressing and releasing button
A
while Pressing and holding button
B
also
change the area name indication.
3.
Press and hold the lower left button
B
for about 1 second.
“ON” or “OFF” and the area name starts blinking and display/hide of the
area becomes adjustable.
4.
Press and release the lower right button
A
to select “ON”
(display) or “OFF” (hide) of the area.
5.
Press and release the lower left button
B
.
“ON” or “OFF” and “S.T.” (summer time) starts blinking and the summer
time setting becomes adjustable.
6.
Press and release the lower right button
A
to set the summer
time.
7.
Repeat steps 2 to 6 to set other areas.
8.
Press and release the upper left button
M
to finish the
procedure.
Resetting the watch — All Reset
1.
Pull out the crown.
2.
Press and release buttons
A
,
B
and
M
at the same time.
All the digital indication lights up.
3.
Push in the crown.
The alarm sounds and the digital indication is turned off.
After All Reset
After All Reset, set the time and calendar and other settings. Set also the alarm.

Citizen C460 Specifications

General

Brand	Citizen
Model	C460
Category	Watch
Language	English