40
Setting the world time
Obtaining location information from satellite signals
It is recommended to receive the satellite signals outdoors with the wide-open
sky. For details, see “Information on satellite signal reception” (page
68
).
The time zone for the home time is set automatically by obtaining location
information and time and calendar are consequently adjusted based on the chosen
zone.
• It may take 30 seconds - 2 minutes to obtain location information.
1
Change the mode to [
TME
] or [
UTC
] and push the
crown in to position
0
.
2
Press and hold the upper right button
Ⓑ
for 2 seconds until the second hand points
“RX-GPS”.
• Release the button as the hands points “RX-
GPS”. Reception starts.
To Next Page
Loading...
