- Eng 6 -
3.1 Turn Power On
Push the cuff tube and Pumping bulb tube over the air connectors.
Press the “Power” switch for
Power on.
All display mark appear for approx. 1 second and buzzer beeps.
MEASUREMENTS
Pumping bulb tube
Cuff Tube
After all display marks are disappeared, the last measured systolic
and diastolic blood pressure values are displayed.
(Value of Pulse is not memorized nor displayed).
Memory function works on for approximately 2 second or during
depressed the “Power” switch.
After memorized blood pressure value is disappeared, deflation
mark “▼” appears.
If there is some air remaining in the cuff, release air with the ex-
haust button until the “0” appears. The buzzer beeps three times.
The unit is now ready to take new measurement.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
To Next Page
Loading...
