SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
3.4 Press the exhaust button
Press the exhaust button valve to completely release the air in the
cuff.
3.5 Power off
Press the “POWER” switch to turn off,
3.6 Subsequent measurement
For another measurement, just pressurize the cuff by pumping bulb.
The time between two such Measurements must be at least 3 min-
utes.
3.7 Auto Power off Function
If the unit is left on after measurement, automatic Power-off Func-
tion turns the power off after approximately 3 minutes. To con-
tinue measurement press the “POWER” switch turning the unit
on.
Battery cover
- Eng 9 -
3.8 Battery Replacement
If the battery becomes weak, the “ ” mark will appear in the
display, indicating that battery should replaced with new one.
Remove the battery cover at mainframe and replace the four pieces
of batteries. Type “AA” battery or equivalent is suitable for this
blood pressure meter.
Battery
English
To Next Page
Loading...
