Citizen CHU305 - CALLING UP THE DATA STORED IN MEMORY; Accessing Stored Measurement Data

- Eng 17 -
Español
English
99 measurement results can be stored in
Memory.
The average value is calculated
automatically to help you manage your daily
health.
2 If you press the Memory switch again, past measurement data are
displayed.
Each time you press the switch, the measurement data are displayed in order from the
most recent to the oldest.
* Example of display when the Memory switch is pressed.
CALLING UP THE DATA STORED IN MEMORY
Memory switch
The data number is
displayed before the
measurement results.
1 Press the Memory switch once.
* Example of display when the
Memory switch is pressed.
Now the LCD displays the amount of the results in the current bank and
indicating the average value appears at the bottom of the display. Then the
average value, based on the last three measurements, is displayed.
• The value stored in memory is numbered in the order of measurements. For
example, when 99 sets of data are stored in memory, the data number 1
represents the latest data.
Data number: 1, 2, 3, ... ... 98, 99

The latest data

The earliest data
00CHU305USA.indbEng-1700CHU305USA.indbEng-17 2015/01/1319:53:212015/01/1319:53:21